|
| 1. How to update firmware? |
Currently no release.
|
| 2. What kind of MPEG-4 support is provided? |
AVI files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format. Typically, the audio will use the MP3 or Dolby Digital format. The MPEG-4 video must conform to ISO MPEG-4 Simple or Advanced Simple profile, without 1/4 pixel (QPEL) and global motion compensation (GMC). The advantage of MPEG-4 is that up to 2 hours of content may be stored on a single CD, at higher video quality than MPEG-2 offers. Users can now easily create their own MPEG-4 video content using MPEG-4 video codec. Xvid 2.10 and Sigma's RPM4(RealMagic MPEG4) also complies with the supported standard.
Resolution up to 720x576, PAL and NTSC standards, up to 1.5Mbit/s on CD media or 3 Mbit/s on DVD media. |
| 3. How can I get the best video performance? |
Please do not connect your v880N via S-video and SCART at the same time.
|
| 4. MP4 file recommend bite rate and size |
Bite Rate on CD Media < 1500 kbit/s
Bite Rate on DVD Media < 3000 kbit/s
Single file Maxi ma size: 2GB
In order to make sure all your files cab be played well, please set the total size of DVD-R (+R/-RW/+RW) <4GB |
| 5. Dose CD/DVD have to close session? |
No, V880N can read mutisession discs. |
| 6. Why there are ghost images when I use component output? |
1. Make sure you connect the right color.
2. Make sure your cable completely plug in.
3. Some component cables have direction, one connecter to TV and another to DVD. Make sure you are using the right end to connect DVD player.
|
| 7. What kind of DVI cable should I use? |
A DVI-D single or a dual link cable can enable a high definition resolution (1920 X 1080) |
| 8. Dose v880N support ".mpg" file playback? |
Yes, V880N supports ".mpg" file playback via network |
| 9. Dose v880N support MP4 subtitle playback? |
Yes, V880N support subtitle ".SRT" format via network playback. |
| |
|
|
| 1.Is Xvid supported? |
Yes, V880N support Xvid. |
2.Dose V880N support 576p? |
Yes, V880N supports 576p. (Europe only) |
| 3. Why there is no image output from v880N? |
Using "TV MODE " button on the remote control. If you can not get any picture from DVI you can reset the video output. It will go though all video output terminals such as composite, s-video, component DVI, etc.., then go back to composite again. |
| 4. How can I use customer setting for DVI ? |
To set up DVI:
1) connect your HD devices to PC and adjust the best resolution with powerstrip.
http://www.entechtaiwan.net/ps.htm
2) Go to DVD setup menu "DVI Setting"
3) Input the numbers in DVI customer setting To customize DVI setting
4) Save the setting.
|
| 5. How can I get the best analog performance from V880N? |
In order to get the best performance of video quality,
please do not connect SCART (Europe only) and component output at the same time. |
| |
|
Select photo album for music playback. (You must define or categorize your photo folders first.) 